a detector warranty is only as useful as the document behind it - Newheek DR Detector - Newheek DR Detector
Newheek specialize in the production of X-ray Detector.
Home›Blog ›a detector warranty is only as useful as the document behind it

a detector warranty is only as useful as the document behind it

A line on a quotation saying that warranty is included says nothing about pixel-defect thresholds, whether the scintillator or the battery is named, who pays return freight, or what happens to a software licence when a panel is replaced. Before an order is placed, three named files should exist: the warranty document, the return-authorisation procedure, and the spare-parts list, each tied to the exact model quoted. An assurance given in a meeting has no standing once a unit has shipped. The clauses that decide downtime are written clauses.

This guide is written for hospitals, veterinary practices, imaging centers and integrators comparing detector quotations. It treats warranty and service as terms to be read, not as a badge on a brochure.

Why a warranty line on a quotation needs a document behind it

A quotation is a sales paper. A warranty document is a service contract. The two are written for different purposes and are not interchangeable. A brochure may list a coverage period in large type while the exclusions sit in a second document that nobody attaches to the quote.

The gap becomes visible at the moment of failure. A panel that stops acquiring images is not resolved by the word “warranty” on a spreadsheet. It is resolved by a named procedure, a contact route, a shipping address and a clause stating which costs are covered. Request those items before the order, while the supplier still has a reason to answer in detail.

Which defects are treated as covered

Coverage varies by supplier and by model family. The table below is a reading aid for the document, not a statement of what any given policy includes. Each line should be matched against the wording supplied for the exact panel being bought.

Component or event Where the wording usually sits Line to confirm in writing
Dead or stuck pixels A threshold stated by model How the defect map is supplied and at what interval
Row or column driver failure Functional-failure clause The test method used to accept or reject the claim
Scintillator layer Listed separately in some policies, excluded in others Whether delamination and burn-in are named
Wireless battery Often a separate term Whether cycle wear is treated as normal ageing
Housing, connector and cable Varies between policies Which parts are named and which are excluded
Recalibration after repair Frequently outside the hardware term Who performs it and who bears the cost
Acquisition software licence A separate agreement Whether a replacement panel triggers reissue

A detector age limit is a separate question from coverage. The detector lifespan guide sets out which parts age and how that ageing is judged; warranty terms decide who pays when it happens early.

How many dead pixels count as a claim

No universal count applies across models. A panel leaves production with a pixel-defect map recording the pixels that fail tolerance at that point. The useful question is not the first number but the direction of change: a count that stays inside the original band points to normal ageing, while a count that climbs between calibrations points to an array under stress.

Dead pixels grouped near one border, or a full row that stopped reading, point to physical shock or a failing driver rather than to ordinary wear. A photograph of the casing cannot show this. Ask for the defect map tied to the serial number and for the threshold used by the supplier’s own service team. If the threshold is not written down, the claim will be argued case by case.

What voids coverage on a flat panel detector

Exclusion lists are not a formality. They describe the events that turn a covered repair into a paid one. Read them for physical shock, liquid ingress, opening of the housing, cleaning agents, electrical supply conditions and use outside the stated environment. A seal broken by an unauthorised opening is visible to a service engineer even when the panel still images correctly.

Environmental exclusions deserve attention in mobile and veterinary work. The durability specification guide explains which ratings describe a real working environment. A panel bought for a clean reading room and used on a farm trolley may be outside the conditions the written terms assume.

How a return authorisation starts

Nothing should be shipped before a return number is issued. The usual sequence is a written fault description, the serial number, the current defect map and photographs of the unit and its connector. The service side then issues an authorisation with a shipping address. A panel arriving without that number can sit in a warehouse for weeks while nobody accepts responsibility for it.

Where the fault is intermittent, record the conditions: exposure settings, room temperature, whether the panel was wired or wireless at the time, and what the image looked like. A service team that receives a note reading “does not work” has no route to a diagnosis. The detector repair guide separates faults that can be isolated on site from those that require a service bench.

Who pays freight, duty and insurance on a return

Cross-border movement is where a written clause earns its keep. The terms should state who pays outbound freight, who pays the return leg, how customs duty is handled, and whether the shipment is insured at replacement value. Silence on these lines is not neutral: it means the argument happens after the fault, when leverage has already passed to the receiving side.

Ask for the shipping address in the document itself, not in a later email. Units sent to a sales office rather than a service depot are a common source of delay.

Repair time and whether a loaner panel is supplied

A repair period is a working-room problem before it is a service problem. The written terms should say how a repair period is counted, whether a loaner unit is available, and what calibration work is needed before a loaner goes into clinical use. A loaner that arrives without a current calibration is a risk, not a solution.

Wireless models add one more line: confirm whether a replacement battery is included with a loaner or whether the original accessory is reused. The wired versus wireless comparison sets out the workflow differences that matter when a unit is out of service.

Whether the software licence follows the panel

Hardware and acquisition software are licensed separately. A replacement panel may need a new licence entry, a reissued dongle or a workstation reauthorisation, and none of that is automatic. The licence agreement should be read alongside the hardware warranty, with the named user and site written into both.

The same question arises when a panel changes hands. A licence tied to a closed practice may not run at the new site even when the hardware is sound. Confirm transfer in writing before the replacement is shipped.

Which spare parts should be named in the contract

Spare-parts availability decides how long a panel stays usable after the written coverage ends. Request a named list rather than a general assurance. A parts list is useful only if it includes an order route and a stated lead time; otherwise it is a catalogue page.

  • Battery and charger for wireless panels
  • Data cable, connector and any interface adapter
  • Protective cover, handle and mounting points
  • Feet, latches and housing seals
  • Calibration file or map for the exact serial number

Parts held in a regional store and parts shipped from a factory behave differently in a breakdown. The distinction belongs in the contract, before the order.

Clauses to write into the purchase order before ordering

One paragraph in the purchase order is worth more than a long conversation. The points below are short enough to copy and specific enough to answer.

  1. Name the exact model and serial range covered by the warranty document.
  2. State the pixel-defect threshold and the method used to measure it.
  3. List excluded events, including shock, liquid and unauthorised opening.
  4. Name who pays outbound freight, return freight, duty and insurance.
  5. State the route for a return authorisation and the service shipping address.
  6. State how a repair period is counted and whether a loaner is supplied.
  7. Confirm whether recalibration after repair is included.
  8. Name the software licence holder, the site and the replacement policy.
  9. Attach the spare-parts list with an order route and lead time.

A supplier that answers these nine lines in writing is showing how the account will be handled after the sale. A supplier that redirects every line to a later conversation is showing the same thing.

Frequently asked questions

What does a flat panel detector warranty normally cover?

Coverage is set by the written document for the exact model. It commonly addresses functional failure of the detector array and electronics, while pixel-defect thresholds, batteries, cables, housing and recalibration are handled with different wording or excluded. The document should name each category rather than relying on the word warranty alone.

Can a detector be sent for repair without a return authorisation number?

A return should not be shipped until the service side has issued an authorisation and a shipping address. The request normally includes the serial number, a written fault description, the current defect map and photographs. Units arriving without an authorisation can remain unclaimed while responsibility for the shipment is settled.

How are dead pixels handled under warranty?

A pixel-defect map supplied with the unit records the baseline count for that serial number. A count that remains inside the original tolerance band is treated as normal; a count that rises between calibrations, or a growing cluster along one edge, points to physical shock or a failing driver. The threshold and the measurement method should be stated in writing, because no single count applies across models.

Does warranty cover drop damage or liquid ingress?

These events are common exclusions in detector policies, and a broken housing seal is visible to a service engineer even when the panel still produces images. The exclusion list should be read before the order, along with the stated operating environment. A panel used outside that environment may fall outside the written terms.

Can a software licence move to a replacement panel?

Only if the licence agreement permits it and the named user and site are recorded. A replacement panel may require a reissued licence entry or a workstation reauthorisation. Confirm the replacement policy in writing before the unit ships, and keep the licence document with the warranty file.

Detector service terms confirmed in writing

Warranty scope, return procedure, freight terms, spare parts and licence handling can be confirmed line by line before an order. Request the documents for the exact model under consideration.

Phone / WhatsApp: +86 19062611512
Email: admin@newheek.cn

Author:Newheek-Detector

(+86) 19062611512
admin@newheek.cn