The flat panel detector is the core component of the DR system. At present, more advanced hospitals will adopt digital DR equipment and no longer use film to bid farewell to the waste of raw materials.
The working principle of the flat panel detector is that the computer controls the data acquisition and transmission timing of the flat panel detector through the control interface of the optical fiber data interface board. The computer reads the image data of the flat panel detector through the optical fiber interface of the optical fiber data interface board.
When the exposure button is pressed, x-rays will not be generated immediately. At this time, the computer reads the background data of the flat panel detector and temporarily saves it. After a short time delay, x-rays are generated and data collection is performed using flat panel detectors. After the acquisition is completed, the computer reads the original data in the flat panel detector and temporarily saves it.
Newheek’s flat panel detectors are divided into 14×17 inches and 17×17 inches according to different sizes. Secondly, our flat panel detectors are divided into wired type and wireless type. If you also want to upgrade a digital DR device, please send your purchase requirements to email@example.com
Tel：86 536 8882360
Company：Weifang Newheek Electronic Tech Co., Ltd.