Newheek specialize in the production of X-ray Detector.
HomeBlog ›Selection and use of flat panel detectors

Selection and use of flat panel detectors

The flat panel detector is the core of the DR technology, which is mainly composed of a protective layer (housing), a fluorescent layer, a circuit board, and a heat sink.
Parameters that need to be paid attention to when selecting flat panel detectors:
Size: 14’’*17’’ (35cm*43cm), 17’’*17’’ (43cm*43cm) and other customized sizes;
Phosphor layer: CSI image is clearer, GdS (GdOS) sensitivity is higher
Semiconductor material: Amorphous silicon is highly sensitive, usually used for dynamic plates, and amorphous silicon is used for static plates
Image software: medical software, veterinary software and industrial software
It can be matched reasonably according to your own needs.
Matters needing attention in the process of using flat panel detector:
Etching effect: The theoretical life of flat-panel detectors is 3 years. Long-term use of flat-panel detectors will produce artifacts that cannot be eliminated due to the etching effect, which will affect the image quality. This is a normal phenomenon and cannot be avoided.
Bearing capacity: 300kg, be careful not to carry too much weight when using
Working environment: 5°-35°, 10-75%RH. When using in high temperature areas such as Africa, please install air conditioning in the operation room. When using in areas with a long rainy season, pay attention to regular dehumidification and moisture prevention.
If you are interested in other questions about flat panel detectors, please call for consultation.


(+86) 18953679166