Newheek specialize in the production of X-ray Detector.
HomeBlog ›Industrial Flat Panel Detector Specifications

Industrial Flat Panel Detector Specifications

Recently, a customer inquired about the specifications of the industrial flat panel detector. The specifications of the flat panel detector are in terms of size, 1417 and 1717 are conventionally used. A flat panel detector consists of a housing (protective layer), a fluorescent layer, a circuit board and a heat sink. The phosphor layer is divided into CSI and GDS (GDOS0). The CSI phosphor layer shows a sharper image, while the GDS phosphor screen is more sensitive.
According to the semiconductor material, it can be divided into amorphous selenium flat panel detectors and amorphous silicon flat panel detectors. Amorphous selenium flat panel detectors have high sensitivity and are often used in dynamic panels.
According to the classification of image software, there can be medical software, animal software and industrial software.
When using a flat panel detector, it should be noted that the optimum temperature for a flat panel operating environment is 5° to 35°. Cooling controls should be used if used in tropical areas. At the same time, attention should be paid to the etching effect. The theoretical lifetime of a flat panel detector is 3 years. Long-term use of flat panel detectors can create artifacts that cannot be eliminated due to etching effects, affecting image quality. This is in addition to today’s flat panel detectors.
If you have other needs, please call us.


(+86) 17616362243