The DR flat panel detector is the core component of DR system. In the process of use, electronic reference drift will occur, resulting in bright line artifacts in the image. The self-edge image is a common artifact fault of DR machine.
The working principle of the flat panel detector is that the computer controls the data acquisition and transmission time sequence of the flat panel detector through the control interface of the optical fiber data interface board.The computer reads the image data of the flat panel detector through the optical fiber interface of the optical fiber data interface board.
When the exposure key is pressed, the X-ray is not generated immediately. At this time, the computer reads the background data of the DR flat panel detector and saves it temporarily.
After a very short time delay, the X-ray is generated and the flat panel detector is used for data collection. After the collection is completed, the computer reads the original data in the flat panel detector and temporarily saves it.
Newheek’s fDR flat panel detectors are divided into 14 by 17 inches and 17 by 17 inches, depending on their size.Secondly, our flat panel detector is divided into wired type and wireless type.
Newheek DR flat panel detector can meet your different procurement needs.
Author:Lillian
Tel:+86 18953679166
Email:service@newheek.com
Company:Weifang Newheek Electronic Tech Co., Ltd.