Newheek specialize in the production of X-ray Detector.
HomeBlog ›Digital flat panel detector

Digital flat panel detector

The digital flat panel detector is the core of the DR technology, which is mainly composed of a protective layer (housing), a fluorescent layer, a circuit board, and a heat sink. The working principle of the digital flat panel detector is that the scintillator on the surface of the detector converts the attenuated X-rays after passing through the human body into visible light, and the amorphous silicon photodiode array under the scintillator converts the visible light into electrical signals. The stored charge is formed on the capacitor of each pixel, and the stored charge of each pixel is proportional to the intensity of the incident X-ray. Under the action of the control circuit, the stored charge of each pixel is scanned and read, and the digital signal is output after A/D conversion, which is transmitted to The computer performs image processing to form X-ray digital images.
Digital flat-panel detectors are mainly composed of two models: 1417 and 1717. The main parameters of digital flat-panel detectors produced by wom Newheek:
Detector category: amorphous silicon
Scintillator: Gadolinium oxysulfide/Cesium iodide
Image size: 35cm ×43 cm /43cm ×43 cm
Pixel matrix: 2560×3072 cm/ 3072 cm×3072 cm
Pixel pitch: 140µm A/D
Conversion: 16bit
Spatial resolution 3.6 LP/mm
Drawing time (wired/wireless): 1s / 2.5s X-ray
Working range: 40-150 KV
Battery standby time: 8 hours
Wireless battery standby time: 10 hours
Data interface: GigE/802.11n, ac
Power: 20 W
Adapter input AC: 100-240V, 50-60Hz
Adapter output DC: 24V, 60W
Detector size: 38×46×1.5 cm /46×46×1.5 cm
Detector weight (wireless with battery/wired): 3.3kg / 2.9kg 3.9kg/4.5kg
Detector housing material: carbon plate, magnesium alloy
Waterproof rating: IPX3
Working environment: 5-35ºC, 10-75% RH


(+86) 18953679166